Sheet Metal Cut and Roll Machine – Aluminum & SS Coil Cutter

Aluminum Coil Cutting and Hemming Machine for Insulation Jacketing

Quick Details:

Cutting material: aluminum sheet and stainless steel sheet
Cutting thickness: 0.012, 0.016，020，0.024，0.032
Cutting width: 36’’, 48’’
Formed diameter: with hem 129mm to infinite; without hem 90mm to infinite
Can cut flat sheet
Feed rate per minute around 7 meters
It can fold flat 1/2cmlength wise at the edge of the metal to create a safe side (hem)
Shipping dimention: 1850*1550*1570mm for the machine. Weight 1500kgs

Introduction

Sheet Metal Cut and Roll Machine – Aluminum & SS Coil Cutter with Hem

EcoIn’s sheet metal cut and roll machine is engineered for cutting aluminum and stainless steel coils into precise lengths while forming clean, safe hems on each edge. This sheet metal cut and roll machine is widely used in aluminum jacketing fabrication for thermal insulation, HVAC ducting, pipeline insulation, tank cladding, and industrial applications. According to Wikipedia, sheet metal processing is fundamental to modern insulation cladding systems.

The hemming function on this sheet metal cut and roll machine strengthens edges, prevents sharp burrs, and delivers a professional finish. EcoIn supplies this sheet metal cut and roll machine factory-direct at competitive pricing with 7–15 day lead time.

Features

Cut & Roll Machine with a hem has below features:

Cutting material: aluminum sheet and stainless steel sheet
Cutting thickness: 0.012, 0.016，020，0.024，0.032
Cutting width: 36’’, 48’’
Formed diameter: with hem 129mm to infinite; without hem 90mm to infinite
Can cut flat sheet
Feed rate per minute around 7 meters
It can fold flat 1/2cmlength wise at the edge of the metal to create a safe side (hem)
Shipping dimention: 1850*1550*1570mm for the machine. Weight 1500kgs
1430*1380*1520 for 2 loading racks

Application

This aluminum cutting and hemming machine is widely used for:

Aluminum jacketing for pipe insulation
HVAC duct insulation cladding
Industrial pipeline insulation
Storage tank insulation covering
Vessel and equipment insulation protection
Aluminum roll cutting and sheet preparation
Metal cladding fabrication workshops
Thermal insulation material production lines

Sheet Metal Cut and Roll Machine – FAQs

What is a sheet metal cut and roll machine?

A sheet metal cut and roll machine is a production tool that uncoils flat aluminum or stainless steel coil stock, cuts it to a specified length, and forms a hem (folded edge) in a single pass. EcoIn’s sheet metal cut and roll machine handles cutting widths of 36″ and 48″, cutting thicknesses from 0.012 to 0.032 inches, and can form flat sheet or hem-finished panels ready for pipe and tank insulation jacketing.

What materials can this sheet metal cut and roll machine process?

EcoIn’s sheet metal cut and roll machine processes aluminum sheet (all alloys) and stainless steel sheet. Cutting thickness range: 0.012, 0.016, 0.020, 0.024, and 0.032 inches. The sheet metal cut and roll machine output speed is approximately 7 metres per minute. Formed diameter: with hem 129 mm to infinite; without hem 90 mm to infinite.

What are the machine dimensions and weight?

EcoIn’s sheet metal cut and roll machine shipping dimensions are 1850 × 1550 × 1570 mm, weight 1,500 kg. The sheet metal cut and roll machine requires standard 3-phase power supply. Custom configurations for wider coil widths are available on request.

Is this sheet metal cut and roll machine suitable for insulation jacketing?

Yes. This sheet metal cut and roll machine is specifically designed for aluminum jacketing production used on pipe insulation, tank insulation, and HVAC duct insulation. The hem edge produced by the sheet metal cut and roll machine creates a safe, interlocking joint system used in industrial insulation cladding worldwide.