Stucco Embossed Aluminum Cladding 0.4-1.2mm

Ecoin stucco Embossed aluminum sheet - EcoIn insulation product

Quick Specifications — Stucco Embossed Aluminum Cladding

Alloy: 1060, 3003, 3105
Thickness: 0.4–1.2 mm
Surface finish: Stucco embossed (“orange peel” pattern)
Optional backing: Polysurlyn moisture barrier
Package: Plastic & carton packing on wooden or steel pallets
Delivery time: 25–30 days
Payment terms: TT, LC, Trade Assurance

Introduction

Stucco Embossed Aluminum Cladding for Pipe & Vessel Insulation

Stucco embossed aluminum cladding is an aluminum jacketing sheet featuring a raised, pebble-like stucco (or “orange peel”) surface pattern. EcoIn manufactures stucco embossed aluminum cladding in alloys 1060, 3003, and 3105, with thickness from 0.4 to 1.2 mm. According to Wikipedia’s aluminium alloy article, alloy 3003 provides superior corrosion resistance compared to pure aluminium, making it the standard specification for outdoor insulation jacketing on pipes and storage tanks.

The stucco embossed finish offers two key advantages for industrial insulation systems. First, the textured surface of stucco embossed aluminum cladding hides minor dents and scratches that occur during installation, maintaining a clean finish throughout the system’s lifetime. Second, the stucco pattern diffuses sunlight reflection, reducing glare on outdoor installations. It’s also called “orange peel” pattern.

Standard Sizes

Thickness(inch)	Thickness(mm)	Width(mm)	Length(m)	Suggested Application
0.016	0.4	914, 1000, 1219	30, 60, 90, coil or sheet	OD below 36”(914mm) insulated lines
0.020	0.5	914, 1000, 1219	30, 60, 90, coil or sheet	OD below 36”(914mm) insulated lines
0.024	0.6	914, 1000, 1219	30, 60, 90, coil or sheet	OD 36”-8′ (914mm-2.19m) insulated lines&equipment
0.032	0.8	914, 1000, 1219	30, 60, 90, coil or sheet	special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications
0.040	1	914, 1000, 1219	30, 60, 90, coil or sheet	special applications where heavy mechanical is required
0.050	1.2	914, 1000, 1219	30, 60, 90, coil or sheet	flat ducts or precipitators. Also recommended for areas subject to high wind conditions

Remarks: Other sizes available upon request.

Chemical Composition

Alloy	Si	Fe	Cu	Mn	Zn	Mg	Ti	Cr	Other Elements		AL
									Each	Total
1060	0.25	0.35	0.05	0.03	0.05	0.03	0.03	–	0.03		99.6min
1100	Si+Fe=0.95		0.05-0.20	0.05	0.10	–	–	–	0.05	0.15	99.0min
3003	0.6	0.7	0.05-0.20	1.0-1.50	0.10	–	–	–	0.05	0.15	reminder
3105	0.6	0.7	0.30	0.30-0.80	0.40	0.20-0.80	0.10	0.20	0.05	0.15	reminder
5005	0.3	0.7	0.20	0.20	0.25	0.50-1.10	–	–	0.05	0.15	reminder

Features

Stucco pattern can reduce sunshine reflect and hide small scratches.
Light weight: Aluminum is about 1/3 weight of iron or steel, making it easier to handle and less expensive to ship.
Strong: the tensile strength can be 85-120Mpa, and can satisfy most of insulation jacketing needed.
Corrosion resistant: they do not rust.
Easy to fabricate & assemble.

Video

Application

Ecoin aluminum sheet can be used as:

Aluminum Jacketing is recommended for HVAC, Insulated Piping, Tanks & vessels less than 8 feet in diameter.

Deep corrugated sheets are recommended for diameters greater than 8 feet.

Chemical Plants & Refineries: Distillation columns, tank farms, fractionation units, cokers and ethylene production units.

Paper Mills: Chemical storage tanks, breechings and ducts.

Steel Mills: Pickle acid tanks, oxygen production units, fuel oil and tar storage tanks.

Miscellaneous: Power station, Food processing plants, LPG storage units, LNG storage units, sewage and waste water treatment plants.

Application Gallery

Download

Type	Name	Size	Date	Down Load
PDF	EcoIn Stucco Embossed Aluminum Coil Catalog	1.02MB	2017-10-20	Click to Download

Stucco Embossed Aluminum Cladding — Product Images

stucco embossed aluminum cladding sheet

Stucco Embossed Aluminum Cladding — FAQ

Common questions about EcoIn stucco embossed aluminum cladding.

What is stucco embossed aluminum cladding used for?

Stucco embossed aluminum cladding is used as a protective outer jacket over mineral wool, glass wool, or foam insulation on industrial pipes, ducts, and storage tanks. The stucco embossed surface conceals installation marks and withstands outdoor weathering. EcoIn stucco embossed aluminum cladding is compatible with flat-sheet cladding and pre-formed pipe sections.

Which alloy is recommended for outdoor stucco embossed aluminum cladding?

For outdoor insulation applications, we recommend alloy 3003 stucco embossed aluminum cladding. Alloy 3003 contains manganese which provides significantly better corrosion resistance than pure 1060 aluminium. For marine environments, pairing 3003 stucco embossed aluminum cladding with a polysurlyn moisture barrier provides maximum protection against saltwater corrosion and condensation ingress.

What thickness of stucco embossed aluminum cladding is standard?

The most commonly specified thickness for stucco embossed aluminum cladding in pipe insulation systems is 0.6 mm. Thinner gauges (0.4–0.5 mm) suit indoor and light-duty applications, while 0.8–1.2 mm stucco embossed aluminum cladding is used for high-traffic plant areas, large tank lagging, or where additional mechanical protection is required. EcoIn supplies any thickness from 0.4–1.2 mm to project specification.

Can stucco embossed aluminum cladding include a polysurlyn moisture barrier?

Yes. EcoIn supplies stucco embossed aluminum cladding with factory-applied polysurlyn laminated to the inner surface. The polysurlyn layer provides a vapour-retardant membrane protecting cold-service insulation from condensation. This stucco embossed aluminum cladding with polysurlyn option suits chilled water pipework, LNG facilities, and outdoor refrigeration systems.