Polysurlyn aluminum jacketing supplied by EcoIn — this project delivered a full container of 3003 H14 aluminum coils with polysurlyn moisture barrier to a customer in Canada, meeting ASTM C1729 and ASTM C1371 standards.
Technical Specification
Below is the Detailed Specificaiton for this project:
- Metal Jacketing Insulation With Dupont Vapour Barrier
Requirement:
1. Inner diameter no more than 8”=208mm, actually we made 200mm.
2. Polysurlyn film needs to be inside the rolls, not outside.
3. ASTM C1729 and ASTM C1371 Standard.
| Description | Width (inch) | Thickness (inch) | Length per coil(inch) |
|---|---|---|---|
| Smooth Aluminum Coils with polysurlyn 3003 H14 | 36 | 0.016 | 100 |
| Smooth Aluminum Coils with polysurlyn 3003 H14 | 36 | 0.016 | 300 |
| Smooth Aluminum Coils with polysurlyn 3003 H14 | 36 | 0.020 | 100 |
| Smooth Aluminum Coils with polysurlyn 3003 H14 | 36 | 0.020 | 300 |
| Embossed Aluminum Coils with polysurlyn 3003 H14 | 36 | 0.016 | 100 |
| Embossed Aluminum Coils with polysurlyn 3003 H14 | 36 | 0.016 | 300 |
| Embossed Aluminum Coils with polysurlyn 3003 H14 | 36 | 0.020 | 100 |
- Shiny Stainless Steel Banding and Clips
| Description | Size | Weigth per roll (kg) |
|---|---|---|
| 304 2B Oscilated Wound Stainless steel Banding 1/2” | 0.38mm x 12.7mm | 27.22 |
| 304 2B Ribbon Wound Stainless steel Banding 1/2” | 0.38mm x 12.7mm | 13.6 |
| 304 2B Ribbon Wound Stainless steel Banding 1/2” | 0.5mm x 12.7mm | 13.6 |
| 304 2B Oscilated Wound Stainless steel Banding 3/4” | 0.38mm x 19mm | 27.22 |
| 304 2B Ribbon Wound Stainless steel Banding 3/4” | 0.38mm x 19mm | 13.6 |
| 304 2B Stainless steel Clip 1/2” | 0.75mmx12.7mm | |
| 304 2B Stainless steel Clip 3/4” | 0.75mmx19mm |
Project Details
DATE
Sep 20th, 2019
COUNTY
Edmonton, Canada
Project Gallary
Get A Quote Today
At vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas.
Polysurlyn Aluminum Jacketing — Product Overview
Polysurlyn aluminum jacketing is a composite pipe insulation cladding that combines an aluminum outer layer with a polysurlyn moisture barrier laminated on the inner surface. It is widely used in industrial piping, HVAC, and mechanical insulation to prevent moisture ingress and protect against corrosion under insulation (CUI). This shipment of polysurlyn aluminum jacketing was produced by EcoIn to ASTM C1729 and ASTM C1371 standards and exported to a customer in Canada.
EcoIn’s polysurlyn aluminum jacketing is manufactured from 3003-H14 alloy aluminum, which offers superior corrosion resistance, strength, and formability. The rolls are available in both smooth and embossed finishes, supplied in 36-inch widths at thicknesses of 0.016 inch and 0.020 inch. The polysurlyn moisture barrier is laminated to the inner surface of each coil, forming a continuous seal that prevents water vapor from reaching the pipe insulation beneath.
Why Choose EcoIn Polysurlyn Aluminum Jacketing?
There are several key reasons why contractors and distributors choose EcoIn for polysurlyn aluminum jacketing. First, the 3003-H14 alloy provides excellent corrosion resistance for outdoor and industrial environments. Second, the laminated polysurlyn moisture barrier outperforms plain aluminum in vapor control, meeting the requirements of ASTM C1729 for inner diameters up to 8 inches. Third, EcoIn maintains strict dimensional tolerances — each coil is inspected before export to ensure the inner diameter does not exceed 208 mm and the polysurlyn film faces inward as required by the customer’s specification.
- Alloy: 3003 H14 — excellent corrosion resistance and formability
- Available thickness: 0.016 in and 0.020 in
- Width: 36 inches standard
- Finish: smooth or embossed
- Polysurlyn moisture barrier laminated on inner surface for CUI protection
- Meets ASTM C1729 and ASTM C1371
For our full range of cladding solutions, visit our aluminum jacketing product page.
