Understanding ASTM E84 Requirements for Commercial and Mechanical Insulation Applications

When discussing fire performance requirements in the North American market, the ASTM E84 (UL 723) test method is one of the most referenced standards for evaluating Flame Spread Index (FSI) and Smoke Developed Index (SDI). Many building owners, architects, and engineers rely on these values to ensure safety, reduce liability, and meet local building code requirements—especially in commercial buildings such as offices, schools, hospitals, and hotels.

1. Class A vs. “25/50” Requirements

In general, a product that achieves Class A under ASTM E84 indicates it meets the following typical performance range:

  • Flame Spread Index (FSI): 0–25

  • Smoke Developed Index (SDI): 0–450

Because of this, some building codes or commercial projects may accept materials with FSI <25 and SDI <450, depending on the application and jurisdiction.

However, certain sectors—especially where mechanical insulation is involved—require stricter criteria.

2. When “25/50” Is Mandatory

This “25/50” threshold is widely considered the standard for insulation used in:

  • Schools

  • Hospitals

  • Hotels

  • Other high-occupancy buildings

  • Mechanical insulation on piping systems

These stricter limits ensure low flame spread and significantly reduced smoke generation, which are critical for life safety in densely occupied environments.

In these cases, the commonly accepted requirement is:

  • FSI ≤ 25

  • SDI ≤ 50

3. Can a Product Be Used If It Meets Class A but Not 25/50?

A product that achieves Class A but does not meet the stricter 25/50 requirement may still be acceptable for certain commercial construction applications, depending on:

  • Project specifications

  • Local building codes

  • Whether the application is architectural (e.g., building envelope) or mechanical (e.g., piping)

However, it would typically not be accepted in applications where “25/50” is explicitly required under engineering specifications.